Pump Repair and Maintenance

Forum dedicated to tips and tricks for new riders and veterans alike.

Re: Pump Repair and Maintenance

Postby Salmonslayer » Fri Sep 20, 2013 10:09 am

RebelRyder wrote:==>> Would you know where to obtain new piston o-ring seals, or know where I could investigate further to dig out that information as well ??

Try Napa or CJ mentioned http://www.mcmaster.com/#

Initially, I looked for pump specific replacement parts online, but, could not find them. Napa was the logical next step.

In the cylinder head I have two flat seals on the top and bottom of the cylinder. It is not like the O-ring for the shaft. I am not sure if we are talking about the same part.

The easiest way to fix this is to stop by my house and get what you need. I have plenty of extra pump parts, so you are welcome to take what ever you can re-use. I was going to throw some of it away soon due to limited space. I am in North Seattle.
'08 Nemesis HP 10m, 12m, 14m
'12 Naish Parks 5m, 7m, 9m
'13 149 MTH Custom
'14 135 Brokite Hybrid
Jailbird Rashie by Neil Pryde
'13 Engine Harness
Carkeek Swim Team distance swim specialist
User avatar
Tacoma Fanboy
Posts: 2744
Joined: Sat Jun 20, 2009 12:07 am

Re: Pump Repair and Maintenance

Postby Kiwi B » Tue Oct 29, 2013 10:02 am

Pump Lube. This "dry" lube I found has worked well for a over a year now and extended the life of my pumps.
Can be found at Home Depot ect
IMG_2970.JPG (30.15 KiB) Viewed 6911 times
User avatar
Kiwi B
Posts: 380
Joined: Sun Dec 12, 2010 11:29 am


Return to Tips and Tricks

Who is online

Users browsing this forum: No registered users and 1 guest